Spicer Hub Service Manual - Manual (Page 3)

1
General Information
This symbol is used throughout this
manual to call attention to procedures
where carelessness or failure to follow
specific instructions may result in
personal injury and/or component
damage.
Departure from the instructions,
choice of tools, materials and recom-
mended parts mentioned in this
publication may jeopardize the per-
sonal safety of the service technician
or vehicle operator.
WARNINGS: Failure to follow indi-
cated procedures creates a high risk
of personal injury to the servicing
technician.
CAUTION: Failure to follow indicated
procedures may cause component
damage or malfunction.
NOTE: Additional service information not
covered in the service procedures.
Tip: Helpful removal and installation
procedures to aid in the service of this unit.
!
!
!
Always use genuine Spicer replacement parts.
IMPORTANT NOTICE
as an example of the types of tools and materials
recommended for use and should not be considered an
endorsement. Equivalents may be used.
Every effort has been made to ensure the accuracy of all information in this guide. However, Spicer Axle and
Brake Division makes no expressed or implied warranty or representation based on the enclosed information.
Any errors or omissions may be reported to:
Marketing Services, Dana Corporation, PO Box 321, Toledo, Ohio 43697-0321
The description and specifications contained in this
service publication are current at the time of printing.
Dana Corporation reserves the right to discontinue or
modify its models and/or procedures and to change
specifications at any time without notice.
Any reference to brand name in this publication is made