Spicer OE - Spicer Pro-40 Tandem Axle - Manual (Page 2)

All applications must be approved by the Dana Application Engineering Department. Specifications and/or design are subject to change without notice or obligation.
©2012 Dana Limited Pro-4062012
Dana Commercial Vehicle Products Group
3939 Technology Drive
Maumee, Ohio, USA 43537
T: 419.887.3000
F: 419.887.5961
www.dana.com
Features :
• Maintains full load rating for hubs, with 0 – 0.56" outset wheels
• Diff Lock option on forward axle
• Optional lube pump
• Maintains overall tire width limits for both single wide-based tires
and traditional dual-tire applications
• Keeps vertical load inboard to lower stress on hub, outer wheel
bearings, and spindle
• Available in 11 mm or 9.5 mm wall thickness
Benefits
:
• Increased longevity and service intervals for wheel ends
• Flexibility of tire and wheel configurations for different
applications and resale
• Allows for maximum hub ratings to promote aluminum hubs
in lightweight applications
• Improved lube flow and efficiency
• Standard without inter-axle shift system
Dana SelecTTrac ™
SelecTTrac, ™ available on the new Spicer Pro-40 tandem axle, creates a versatile solution to maximize GAWR rating and bearing life for
single wide-based tire configurations.
Incredibly Strong and Lightweight
The new Spicer ® Pro-40 ™ tandem axle is specifically engineered to dramatically decrease weight and increase your bottom line.
Approximately 100 pounds lighter than the nearest competitive product, the Spicer Pro-40 is designed for 80,000 lb GCW applications
with engines of up to 475 HP and 1,750 lb. ft. torque with overdrive transmissions. This lightweight axle offers improved inter-axle drive-
line angles and is available in a popular range of ratios (3.25 – 3.91) for the professional line haul, regional haul, and city delivery fleets.
Dramatic Weight Reduction
• Offers improved fuel economy
• Increases your bottom line with a significant increase in payload ability
Than the Nearest Competitive Product
POUNDS
LIGHTER
100
Model Identification
D 40-1 4 5 X
Options
D – Wheel Differential Lock (forward unit only)
H – Heavy Wall Housing
P – Lube Pump
S – SelectTrac
X – Without Inter-axle Differential Lock
Design Level
Head Assembly Series
Gear Type – 1 Standard Single Reduction
GAW Rating x 1000 lbs.
D - Dual Drive Forward Axle with Inter-axle Differential
R - Dual Drive Rear Axle