Spicer Lube Manifold User Manual
Page 2
2
5.
Now with the collar lock installed, push the hose through the back side of the collar and install the filter into the
end of the hose.
6.
Next, push the filter and hose down into the collar so that the filter is fully seated. Because of the increased
diameter of the hose after the filter is installed, the hose should fit snugly into the collar.
For spec’ing or service assistance, call 1-800-
24 hours a day, 7 days a week
Or visit our web site at:
http://www.
VSLFHUSDUWV.com
Dana Holding Corporation
SHAIS181A
Copyright Dana Corporation, 2008
Heavy Vehicle Technologies and Systems Service
June 2008
All Rights Reserved.
P.O. Box 4097
Printed in U.S.A.
www.dana.com
Toledo, Ohio 43697-0321