Spicer S400-S - Manual (Page 4)

Specifications
Axle Identification
All axle assemblies are identified with two tags; one located on the
differential carrier, and the other located on the right hand side of the
axle housing.
The differential carrier tag contains the following: Dana part
number, julian date code, and ratio. Optional items include customer
part number, line set number, an the last six digits of the vehicle
serial number.
Model Identification
The axle assembly tag contains the following items: Dana part
number, julian date code, axle model, and ratio. Optional items
include customer part number, line set number, and the last six
digits of the vehicle serial number.
Locating Model Designation Information
• Axle Model Identification, Part Number and Serial Number are located on a tag at the axle centerline. This information will help to locate information
in this book and to identify the correct parts for servicing.
Drive Axles
CUST. PART NO. Spicer ®
SPEC. SERIAL NO.
MODEL PART NO. RATIO
MADE IN:
• Model Number, Part Number and Serial Number are located on the data plate on the axle centerline
Drive Axle Assembly Tag
1. The OEM part number assigned to the axle build.
2. The specification number assigned to the axle build by Spicer. The spec number will identify all the component parts of the axle as built
by Spicer, including special OEM requirements such as yokes or flanges.
3. The axle model identification.
4. The production or service part number of the carrier assembly.
5. The gear ratio of the axle.
6. The serial number of the carrier assembly assigned by the manufacturing plant.
7. Country of Origin
Note: When inquiring about specific information on your axle, write down all of the above information from your tag and call your
local OEM dealer or your Spicer representative.
• The axles illustrated in this book are specified with a variety of different axle shafts, according to OEM specifications.
When ordering replacement axle shafts, note the part number stamped into the flange.
3