Spicer IPL: Models ON or AFTER June 10, 2013 - Manual (Page 36)

34
Differential Lock Shift Parts - All Models Made ON or AFTER June 10, 2013
Wheel Differential Lock Shift Parts
All
Item Description Qty Diff-Lock Notes
Models
Kit - Diff Lock Parts Conversion-190 Series (note 1) 504097 Includes items 1-10
Kit - Diff Lock Cylinder Repair 512895 Includes items 2, 5-8
1 Sliding Clutch 1 140024
2 Spring-Compression 1 131102
Kit - Shift Fork & Pin 504095 Includes items 3-4
3 Shift Fork-NSS 1 140008-nss
4 Pin 1 210020
5 Piston & Rod Assembly 1 134482 Will replace 131237 - note 2
6 O-Ring - Piston 1 210180
7 O-Ring - Cap Cover 1 131665 Will replace 220HH102 - note 3
8 Piston Cover (Diff Lock Cap) 1 131096
9 Washer 1 129034
10 Switch 1 129035
11 Plug - Carrier 1 127195 Use for Non Diff Lock Mdls
12 O-Ring & Plug Assy 1 131487 Use for Non Diff Lock Mdls
Note 1: The “170” Series carriers cannot be converted to Diff Lock. You must have the unique base carrier sub-assy that has the Diff Lock
shift cylinder. You would need to purchase a replacement carrier. All “190” Series have the shift cylinder as part of the standard design.
Note 2: The 134482 and 131237 are completely interchangeable parts. Dana service will continue to use up the 131237 in kits until further
notice.
Note 3: The 220HH102 is replaced by 131665. Parts are completely interchangeable and Dana service will continue to use up the 220HH102
in kits until further notice.
6
7
5
2
3
4
1
10
9
WHEEL DIFFERENTIAL LOCK ASSEMBLY
8
12
11