Spicer Establishing Proper Pinion Position User Manual
Spicer For the car
ESTABLISHING PROPER PINION POSITION
AXL-TEC-12
TECHNICAL
DATE: July 14, 1993
TO: All
Spicer
®
Axle Distributors
This bulletin represents form 5726 in describing proper pinion position for the mode 60 front
and rear axles. This form (5726) is included in the pinion adjustment shim package
(701126X, which are included in the drive gear and pinion assembly kits, 707345-2X, or
707345-1X.
Axle assemblies are manufactured with a selective adjustment shim/slinger between the inner
pinion bearing cone and pinion gear head. However, they may be serviced using the selective
shim/slinger and/or shims placed in the carrier bore behind the inner pinion bearing cup. Refer to
your vehicle service manual for proper procedures in determining the amount of shims required.
If additional copies are needed, please contact your District Sales Manager.
Joe Hoppe
Product Specialist