Spicer 127588 User Manual
Spicer, Drive axles
Spicer
®
Drive Axles
P/N: SHAIS174
INFORMATION SHEET – 127588 NUT TORQUE
Affected Models: All Dana Models That Use the 127588 Locknut
Below are the general specifications for 127588 locknut. This is a “torque prevailing” locknut. The
nut is to be used on drive pinions, input & output shafts that do not have a cotter pin hole drilled thru
the threads.
Part-No:
127588
Thread Size:
M39x1.5
Torque:
680-832 lbs. ft (920-130 N
.
m)
For spec’ing or service assistance, call 1-800-621-8084 24 hours a day, 7 days a week.
Or visit our web site at:
Dana Corporation
SHAIS174A
Copyright Dana Corporation, 2006
Heavy Vehicle Technologies and Systems Service
April 2006
All Rights Reserved.
P.O. Box 321
Printed in U.S.A.
Toledo, Ohio 43697-0321
1