Seals - drive, steer & wheel ends, Seals - rear pinion location – Spicer HEAVY AXLE COMPONENTS User Manual
Page 27
SPICER DRIVE AXLE SERVICE KITS
26
Seals - Drive, Steer & Wheel Ends
FEATURES:
•
Same OEM engineered quality seals used in today’s production units which includes the Micro-Lip XL designs
•
Seals made of high-performance Viton which prolongs seal life at extreme heat temperatures unlike conventional seals
•
Seals are resistant to degradation by a wide spectrum of fluids, including lubricants and their additives
Seals - Rear Pinion Location
Spicer Model
Spicer Part #
Notes
D135, R30
454755C1
Original design
F155S, F170S
454706C1
Original design
GGAHH106
Part used until July 1991
029HH100
Used After July 1991. Triple Lip design (brown)
*note1
S135, S150
029HH100
Triple Lip design (brown) *note 1
G175S/T, G190S, M190T, M210T, M220T, M230T
070HH139
Original design part used until July 1991
GGAHH109
Used After July 1991. Triple Lip design (brown)
*note1
N175, N190, N210, J175S, J190S, J210S, J220S, J230SB,
W230S, G340S (RR), G380S(RR)
GGAHH103
Original design part used until July 1991
Note 1: After March 1993, as a running change, the seal design was changed to Triple Lip design with vents (brown seal lips)
Note 2: Some seals are designed for specific models and may not be backwards compatible to older generation models or models in
unique applications like front drive steers. It’s best to know seal dimensions if not sure
Spicer Seal Drivers
are listed on page 29