Velleman VMB4PD - Manual (Page 24)

VMB4PD 24
10. Press the lower buttons to add or to remove the displayed command to or from the program step.
Following symbols can be displayed:
- The command has not been accepted in the program step
Ÿ The command has been accepted in the program step. The push button will be
activated automatically on the time (day, hour, minutes) programmed and
memorized into the program step.
11. Press the configuration button to display the next program step setting menu.
12. Press the lower buttons to add or to remove the displayed command to or from the program step.
Label command 1 Label command 2
Add or remove command 1 Add or remove command 2
Next program step setting
Label command 3 Label command 4
Add or remove command 3 Add or remove command 4
Next program step setting
Next program step setting