Veris Verabar Brochure - Manual (Page 4)

The Verabar offers the widest application range
of any flow sensor. It accurately measures gas, liquid
and steam.
High Pressure Design
2500# ANSI Class
6000PSI and 1000ºF
The Verabar’s versatile design lends itself to
a wide range of applications. Contact Veris
application engineering for
your special requirements.
Square and
Rectangular Ducts
Large Stacks and Ducts
Up to 21 feet
(6 meters)
Specialized Mounting
• PVC • Concrete
• FRP • Cast Iron Pipe
Regular Models — (Threaded Components)
Model Number Type of Mounting
Tube Fitting
V100 (Single Support)
V110 (Double Support)
Spring-Lock
V150 (No opposite
support required)
Hot Tap Models —
(Threaded Components)
Screw Drive
V200
Low Pressure
Hand Insertion
V250
Hot Tap Models —
(Flanged Components)
Model Number Type of Mounting
Screw Drive
V400
Low Pressure
Hand Insertion
V450
Flanged Models — (Flanged Components)
Flanged
V500 (Single Support)
V510 (Double Support)
Flanged Spring-Lock
V550 (No opposite
support required)
V100
Verabar Model Selector
Verabar Applications
V110 V150
V500 V510 V550
V200 V250
V400 V450
Gas Liquid Steam
Natural Gas Cooling/Chilled water Saturated
Compressed Air Boiler Feed Water Superheated
Combustion Air De-Mineralized Water Main Header
Hydrocarbon Gas Hydrocarbon Liquids Custody Transfer
Hot Air Cryogenic Distribution
Blast Furnace Gas Thermal Transfer Fluids Energy Studies
Extended Range Applications
Fast and Easy Model Selection
The easy-to-operate Veracalc computer program features:
• Flow Calculations: DP from flow rate, or flow rate from DP.
• Model Selection: Complete model selection from drop down menus.
• Structural Analysis: Verifies sensor strength at flowing conditions.
• Temperature and Pressure Limits: Error warnings if limits are exceeded.
The Veracalc PC program is available from your local representative,
the factory or it can be downloaded from our website at www.veris-inc.com.