Veris Technologies pH Manager - Field Reference Guide - Manual

3. In Manual Mode test each function
(washing, raising and lowering):
1. Inspect unit for loose
or missing bolts, other
obvious problems
4. Raise and lower sampling shoe —check scraper for
appropriate contact:
5. Inspect prox sensor light during manual cycling:
2. Are sampling shoe and
trough completely clean of
soil?
Adjust hydraulic flow so cycling time is 1.5-2 seconds
Field Reference Guide
—pH Manager
Keep with pH System and refer to daily.
(Refer to Operating Instruction Manual for complete instructions)
PRIOR TO MAPPING: PERFORM ROUTINE DAILY
MAINTENANCE