Veris Industries PW SERIES Install - Manual

Installation Guide
Pressure
Z202882-0U Page 1 of 4 ©2013 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected] 06131
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
TM
NOTICE
• This product is not intended for life or safety applications.
• Do not install this product in hazardous or classified locations.
• Read and understand the instructions before installing
this product.
• Turn off all power supplying equipment before working on it.
• The installer is responsible for conformance to all applicable codes.
No responsibility is assumed by Veris Industries for any consequences arising out of the
use of this material.
Product Identification
Product Overview
The PW Series pressure transducer measures the differential pressure across pumps, filters, heat exchangers, and
other non-corrosive wet media. Several operational pressure ranges are available, and the analog output is user
selectable (4-20 mA, 0-5 V, or 0-10 V). PW Series devices are warranted to meet accuracy specifications for a period
of five years.
PW Series
Wet Media Differential Pressure Transducer
available
Local Display
L = LCD Display
X = No Display
NIST
N = NIST
X = None
US or EU
S = Standard 3
C = CE
Operational Range 1
03 = 0-50 psig
04 = 0-100 psig
05 = 0-250 psig
06 = 0-3.5 barg
2
07 = 0-7.0 barg 2
08 = 0-17 barg 2
PW
1 Select operational range according to maximum gauge pressure, NOT differential pressure.
Example: High gauge pressure=90 psig, Select 100 psig model (04).
2 barg models use BSPT threads on sensor fittings.
3 Not available with barg units.