Veris Industries Seahawk leak detection accessories Install - Manual

L D C E
S e a h a w k l e a k d e t e c t i o n a c c e s s o r i e s
The SeaHawk Leak Detection Cable Evaluator (LDCE) is designed to work specifically with SeaHawk leak
detection panels that utilize SeaHawk Leak Detection Cable (SC).
The LDCE is used to test and measure the precision of any length of SC. The LDCE simplifies cable testing,
system troubleshooting, and maintenance because it measures leakage current across the cable’s two
sensing wires. This is important because a high leakage current can affect the accuracy of readings. A
reading of zero is ideal; however a reading of 25uA or less is acceptable.
The LDCE includes a pre-connected, 2 foot (.61m) interface cable. Notably, the LDCE can also be used to
test SeaHawk Water Seeker Cable (WS), our two-wire purple cable, with the supplemental purchase of an
adaptor (WS-A). In addition to testing SC and WS, the LDCE can be used to test its own internal battery
and current source.
IMPORTANT: A multi-meter with a micro current (uA) scale is required to operate the LDCE. A multi-
meter is not included with the LDCE. Contact RLE for details about our optional multi-meters.
Key Features & Benefits
ƒ Quick-connect cable connection to SeaHawk SC cable
ƒ Simplifies cable testing, troubleshooting, and maintenance
ƒ Battery powered
ƒ Tests its own internal battery and current source
ƒ Includes a pre-connected interface cable
ƒ Optional multi-meters with uA scale
ƒ RoHS compliant