Veris Industries TD SERIES Install - Manual

Installation Guide
Temperature
Z205467-0D Page 1 of 2 ©2013 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected] 08132
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
TM
NOTICE
• This product is not intended for life or safety applications.
• Do not install this product in hazardous or classified locations.
• Read and understand the instructions before installing
this product.
• Turn off all power supplying equipment before working on it.
• The installer is responsible for conformance to all applicable codes.
No responsibility is assumed by Veris Industries for any consequences arising out of the
use of this material.
Product Identification
Product Overview
TD, TF, and TG temperature sensors monitor the temperature of the air inside a duct. The probe is available in
multiple lengths to suit multiple applications. All models have standard resistive outputs compatible with building
control systems, and all models are warranted for a period of five years.
TD/TF/TG Series
Duct Mounted Temperature Sensors
Specifications
Wiring 22 AWG; 2-wire RTD/Thermistor
Housing Stainless Steel
COMPLIANCE INFORMATION
Approvals CE
TF
TD
TG
T
Enclosure Probe Length
B = 4" (102 mm)
C = 6" (152 mm)
D = 8" (203 mm)
E = 12” (305 mm)
F = 18” (457 mm)
G = 24” 610 mm)
K = 36” (914 mm) D = Duct
F = Duct w/
mounting box
G = Duct w/ water
resistant housing
Cal Certificate
0 = None
1 = 1 point Cal validation
2 = 2 point Cal validation
Sensor Type Output
= Resistive B = 100R platinum, RTD
C = 1k platinum, RTD
D = 10k T2, Thermistor
E = 2.2k, Thermistor
F = 3k, Thermistor
G = 10k CPC, Thermistor
H = 10k T3, Thermistor
I = 1k Balco (Nickel-iron) RTD
J = 10k Dale, Thermistor
K = 10k w/11k shunt, Thermistor
M = 20k NTC, Thermistor
N = 1800 ohm, Thermistor
R = 10k US, Thermistor
S = 10k 3A221, Thermistor
T = 100k, Thermistor
U = 20k “D”, Thermistor
W = 10k T2 high accuracy, Thermistor
Y = 10k T3 high accuracy, Thermistor
Z = 10k E1, Thermistor
CC = 15k, Thermistor
RШ