Veris Industries AE012 Install - Manual

Installation Guide
Accessories
ZL0120-0A Page 1 of 5 ©2013 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected] 08131
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
TM
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
• Follow safe electrical work practices. See NFPA 70E in the USA, or applicable local codes.
• This equipment must only be installed and serviced by qualified electrical personnel.
• Read, understand and follow the instructions before installing this product.
• Turn off all power supplying equipment before working on or inside the equipment.
• Use a properly rated voltage sensing device to confirm power is off.
DO NOT DEPEND ON THIS PRODUCT FOR VOLTAGE INDICATION
Failure to follow these instructions will result in death or serious injury.
DANGER
A qualified person is one who has skills and knowledge related to the construction and
operation of this electrical equipment and the installation, and has received safety
training to recognize and avoid the hazards involved. NEC2011 Article 100
No responsibility is assumed by Veris Industries for any consequences arising out of the
use of this material.
NOTICE
• This product is not intended for life or safety applications.
• Do not install this product in hazardous or classified locations.
• The installer is responsible for conformance to all applicable codes.
Product Identification
Part Number Description
AE012 NEMA 4X enclosure for E5x meters with swing panel kit
Product Overview
The AE012 enclosure offers a mounting option for E5x Series energy meters that helps protect from tampering
and the elements. The enclosure is equipped with DIN rail mounting hardware for easy installation and a NEMA 4X
rating for durability. The swing panel kit and multiple locking options provide additional security from unwanted
tampering.
AE012
Enclosure for E5x Series Energy Meters
With Swing Panel Kit
RoHS
Compliant
Pictured with the E5x meter
installed. E5x meter and AE012
enclosure are purchased separately.
Dimensions
4.25”
(108 mm)
4.25”
(108 mm)
6.75”
(172 mm)
6.75”
(172 mm)
8.5”
(216 mm)
5.3”
(76 mm)