Veris Industries AA57 Install - Manual

Z205514-0B PAGE 1 ©2012 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected] 04121
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
TM
ENVIRONMENTAL SENSORS INSTALLATION GUIDE
European Wall Mount Adapter Kit for PX
AA57 AA57
NOTICE
• This product is not intended for life or safety applications.
• Do not install this product in hazardous or classified locations.
• Read and understand the instructions before installing
this product.
• Turn off all power supplying equipment before working on it.
• The installer is responsible for conformance to all applicable codes.
PRODUCT IDENTIFICATION
AA57 Wall mount adapter kit
INSTALLATION
1. Insert tubing and wiring through back of
junction box (junction box not included
with AA57).
2. Attach adapter plate to junction box.
3. Run wiring into PX. Wire to terminals as
shown in PX installation guide.
4. Thread screws through adapter plate and
into wall.
5. Completed assembly.
OPERATION
Install the AA57 Adapter kit when mounting the PX series dry media differential
pressure transducer to a European-style junction box.