Veris Industries H11D Datasheet - Manual

current monit
oring
VERIS INDUSTRIES
800.354.8556 +1 503.598.4564 www.veris.com
SPECIFICATIONS
Sensor Power Induced from monitored conductor
Response Time 1 sec.
Accuracy ±2% of full scale
Frequency Range 50/60 Hz
Temperature Range -15° to 60°C (5° to 140°F)
Humidity Range 10-90% RH non-condensing
LCD Backlight Off at low currents; illuminates when monitored current exceeds 4.5A;
flashes during an alarm state while current remains above 4.5A
On-State Resistance ≤1.0 Ω
Off-State Resistance ≥1.0 MΩ
Setpoint Target Range, Switch Setting A* ±40% of learned nominal current; max. learned current of 142A to enable an upper trip limit at or below 200A
Setpoint Target Range, Switch Setting B* ±60% of learned nominal current;max. learned current of 125A to enable an upper trip limit at or below 200A
Switch Setting C* On/Off Status; contacts are closed while amperage is above 2.5A
Alarm Reset Range ±5% of learned nominal current **
Setpoint Calibration Learn Period 30 sec.; self-learning, pushbutton reset
Normal-to-Alarm Output Delay 1 sec. maximum
Alarm-to-Normal Output Delay 30 sec. nominal
Insulation Class 600VAC RMS (UL); 300VAC RMS (CE)
Terminal Block Wire Size 24-14 AWG (0.2 to 2.1 mm 2 )
Terminal Block Torque 3.5 to 4.4 in-lbs (0.4 to 0.5 N-m)
Agency Approvals UL508 open device, CE: EN61010-1:2001-02, CAT III, pollution degree 2
* Trip point switch positions A and B are not for use in applications where the current will fluctuate by more than 40% (A) or 60% (B) of the nominal current. If the current will fluctuate by more than 60%, use the H11D for on/
off status (position C) only.
** The upper trip limit alarm resets when the current drops by 5% of the learned nominal current limit. The lower trip limit alarm resets when the current rises by 5% of learned nominal current limit.
Specification Note: For CE compliance, conductor shall be insulated according to IEC 61010‑1:2001.
The product design provides for basic insulation only.
Do not use the LCD as evidence of applied voltage.
DESCRIPTION
The Hawkeye TruStat H11D is a microprocessor based, self-learning, self-calibrating
current switch. It is designed for user ease, providing calibration-free status for
both under and overcurrent, an LCD display, and slide-switch selectable trip point
limits. At initial power-up, the H11D automatically learns the average current on the
line with no action required by the installer. Once a current is learned, the switch
monitors for changes in current greater than the selected range.
APPLICATIONS
● HVAC fans, pumps, and blowers
● Monitoring status of industrial process equipment
FEATURES
● Backlit LCD display...view the monitored current (up to 200A)...eliminates the
need for expensive handheld meters and offers easy visibility in dark enclosures
● Automatic calibration...reduced errors and installation costs
● Slide-switch selectable trip point limits...application versatility
● Microcontroller based learning technology...automatically learns load upon
initial power-up...eliminates labor associated with calibration
● Records and displays the amperage level that trips the alarm...simplifies
troubleshooting
● Reset function can be used when unpowered...reduces the possibility of an
undesirable arc flash incident
● Monitors current for both under- and over-load in one package
● 100% solid state...no moving parts to fail
● Small size fits easily inside small starter enclosures...saves space
● Self-gripping iris for easy installation
● Bracket can be installed in three different configurations...added flexibility
● 5-year warranty
LCD Display
Current Switch:
Auto Calibration,
Automation Systems
Maximize Reliability
Minimize Installed Cost
Year
Warranty
5
H11D
H11D
TM
LCD
DISPLA
Y! LCD
DISPLA
Y!
HQ0003679.C 01131