Monitor mounting, Main menu – V-Tech DT47 Manual User Manual
Page 3
Advertising
2. Monitor Mounting
145~160 cm
1. Use the screws to fix the Mounting Bracket on the mounting box.(fitting accesories
includes a Bracket (Two pieces of 4X25 screws are needed for fastening the
Mounting Bracket), Special 2 wire connectors to connect with Monitor)
2. Wire the system correctly(see the later connection chapter) then hang the Monitor
on the Mounting Bracket firmly.
3. Main Menu
Touch the screen anywhere on monitor
in standby mode, the main menu page
will be shown as follows:
-2-
Advertising