V-Tech G21 Manual - Manual (Page 7)

• On main menu page,touch " Event->Event clear".A password will be asked. Input the
password by touching the digital keypad,1234 is the default password,the password can be
modified at any time.
• All call records and alarm records will be cleared.
Clear all call records and alarm records
5.System Tools
• Touch "User Setup->System Tools" on main menu page of the Guard Unit, a password will
be asked. 2412 is the default password.
• Input the code number by touching the digital keypad, press " * " key to select the digit, press
" # " key to save the settings.
• When enter the setting page,the IP address of the Guard Unit can be set.
• Each guard unit should be assigned with one IP address in IP system.Input code number of
2108 by touching the digital keypad,then input IP address,the range is from 247~254.
• On main menu page of Guard Unit,touch " Event->Missed calls ",all calls that has not been
answered will be shown .
• Touch " Event->All calls", all calling records ,the latest calling record ,the call type, call time
and the address will be displayed. and If the system has no calling records,it will show "have
no record !".
• Press "Page Up" to see last page calling records,and press "Page Dn" to see next page
calling records.
• Press one of calling record item, then press "Dial" icon to call the current monitor or door
station.
• The calling is the same as Guard Unit calls monitor or door station.
• The system will cut off automatically if exceeds the maximum calling waiting time in calling
state or exceeds maximum talking time in talking state.
Checking all calls record
current monitor.
• If the user answers the call,the guard person can talk with the user immediately.
• The system will cut off automatically if exceeds the maximum calling waiting time in calling
state or exceeds maximum talking time in talking state.