Replace a handset, Getting started – VTech LS6204 Manual User Manual

Page 8

Advertising
background image

5

Getting started

Replace a handset

If you want to replace a handset or re-assign the designated handset number

of a registered handset, you must deregister all the handsets and then

individually register each handset.
To make deregistration easier, read all of the instructions on this page before

you begin.
To deregister all handsets:

Press and hold

HOLD on the telephone base for about 10 seconds until

the telephone base displays

Deregister all handsets?

Press the

YES softkey.

All system handsets show

Searching for BASE. The deregistration

process takes about 10 seconds to complete. All handsets show

NOT REGISTERED when the deregistration completes.

If deregistration fails, the handset displays

Registration failed and then

To register, pick up handset from CHARGER. Pick up the registered

handset and try the deregistration process above again.

1.

2.
3.

You cannot deregister a handset if any system handset is in use.

Cleaning tips for your touch screen telephone

Use the cleaning cloth provided with your

LS6245 to clean your telephone.

Clean your telephone only with a dry non-abrasive cloth. The use of a

dampened cloth, cleaning fluids or liquids of any type may permanently

damage the touch panel of your telephone.
If you unplug the telephone before cleaning, remember to reset the clock

when done.

Advertising