Telephone base and charger installation, Telephone base and charger, Installation – VTech CS6829 Manual User Manual

Page 6: Getting started

Advertising
background image

2

Getting started

Telephone base and charger installation

Install the telephone base and charger as shown below.
If you subscribe to digital subscriber line (DSL) high-speed Internet service through

your telephone line, you must install a DSL filter between the telephone line cord and

telephone wall jack. Contact your DSL service provider for more information about

DSL filter.

Use only the power adapters supplied with this product. To order a replacement, visit

our website at

www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to

www.vtechcanada.com or call 1 (800) 267-7377.
The power adapters are intended to be correctly oriented in a vertical or floor mount

position. The prongs are not designed to hold the plug in place if it is plugged into a

ceiling, under-the-table or cabinet outlet.

Telephone base

Charger

Telephone line cord

Telephone wall jack

A DSL filter (not

included) is required

if you have DSL

high-speed Internet

service.
The DSL filter must

be plugged into the

telephone wall jack.

CAUTION:

If you subscribe to telephone service from a cable company or a VoIP service

provider, contact your cable/VoIP service provider for more information.

Electrical outlet

(not controlled

by a wall switch)

Charger

adapter

Electrical outlet

(not controlled

by a wall switch)

Telephone

base power

adapter

Advertising