VTech CS6519-2 Manual - Manual (Page 21)

17
Telephone settings
Key tone
You can turn the key tone on or off for each handset.
If you turn the key tone on, the handset beeps with each key
press. If you turn the key tone off, there are no beeps when you
press the handset keys.
Press MENU when the handset is not in use.
Press or until the handset displays Settings,
then press SELECT.
Press or until the handset displays Key tone,
then press SELECT.
Press or to choose Key tone:On or Key tone:Off.
Press
SELECT to save your selection. You hear a
confirmation tone.
Home area code
If you dial local calls using only seven digits (area code not required), you can program
your home area code so that when you receive a call within your local area, the
telephone number is automatically stored in the caller ID log without the area code.
Press MENU when the phone is not in use.
Press or until the handset displays Settings,
then press SELECT.
Press or until the handset displays Home area code,
then press SELECT.
Use the dialing keys ( 0-9) to enter the desired home
area code.
Press DELETE to delete a digit.
Press and hold DELETE to delete all digits.
5. Press SELECT to save. You hear a confirmation tone.
If, in the future, your telephone service provider requires you to dial
the area code when making a local call, or, if you move to a location
that requires it, follow the steps above to delete the home area code
you have already programmed. After you have deleted the home
area code, _ _ _ appears.
1.
2.
3.
4.
5.
1.
2.
3.
4.
•
•
Settings
ECO
Key tone
ECO
Key tone:On
ECO
Home area code
ECO
Home area code
ECO
- - -
Settings
ECO