Warrior 861 TOW BAR –BUMPER ADAPTER (Universal) - Manual

Protecting Your Adventure Lifestyle
========================================================================================
QUALITY • INTEGRITY • INNOVATION • SERVICE
Warrior Products, Inc.
16850 SW Upper Boones Ferry Rd
Ste. A
Durham, OR 97224
Phone (888) 220-6861
Fax (503) 692-0364
[email protected]
TOW BAR –BUMPER ADAPTER
INSTALLATION INSTRUCTIONS
WAR 861
NOTE: Please read all instructions before starting installation .
Your Tow Bar Bumper Adapter should be installed by a professional installer or fabricator experienced
at installing tow bars, and at wiring in lights on the tow vehicle. Points that need close attention:
1. Using your Brackets as templates, mark mounting surface and drill _” holes. The brackets must be at
least 24” apart.
2. Fabricate a structure on the towed vehicle so that the Tow Bar is pulling on the frame only. As the Tow
Bar will be attached to the bumper, fabricate a support to the frame similar to a winch attachment.
3. Bolt brackets with supplied _ x 1 _” grade 5 bolts. Use large flat washers and 2-way lock nuts on the
inside of mounted part. Torque bolts to 75 ft lbs.
4. Congratulations! Now you’re ready to attach your Warrior Products Tow Bar.
If you need further assistance installing your product, please contact us by email at
[email protected] or call us at (888) 220-6861.
THANK YOU FOR PURCHASING WARRIOR PRODUCTS