Warrior 201 - Baja Tire Carrier (Universal) User Manual
Page 4
Protecting Your Adventure Lifestyle
========================================================================================
QUALITY • INTEGRITY • INNOVATION • SERVICE
Warrior Products, Inc.
16850 SW Upper Boones Ferry Rd
Ste. A
Durham, OR 97224
Phone (888) 220-6861
Fax (503) 692-0364
TIRE MOUNTING
1. The top of the tire support bar has an octagon shaped plate with 4 holes. In the bottom hole. These holes are to
match your wheels bolt patterns.
2. Start by placing one of your 7/16” allen socket bolts in the very bottom hole. Install a nylock nut on the bottom side
and tighten.
3. Install your wheel over the large stud on the support bar, and align one of your lug nut holes with the socket bolt
you just installed.
4. Rotate the wheel slightly until you find which additional hole in the plate lines up with your lug nut holes in your
wheel. Remove the wheel and place your second 7/16” allen sock bolt in that hole. Again, place a nylock nut on
the underside and tighten.
5. Now put your wheel/tire back into place so that the main threaded post is in the center hub, and the allen socket
bolts are lined up inside of your lug nut holes.
6. Install wheel grip plate (I) over the threaded stud so that it sits inside the center of your wheel
7. Thread main handle (J) onto the tire support bar and tighten wheel to hold it securely in place.
8. You have now completed the installation of your spare tire carrier. Finish up by re-checking that all bolts are tight,
and secure your tire to the carrier by adding a padlock thru the hole in the threaded portion of the tire support bar.
If you need further assistance installing your product, please contact us by email at
or
call us at (888) 220-6861. For more accessories visit
www.warriorproducts.com
THANK YOU FOR PURCHASING WARRIOR PRODUCTS