Warrior 53010-53010C CJ & YJ FRONT BUMPER WITHOUT HITCH (1976 – 1986 Jeep CJ5, CJ7, & CJ8) - Manual

Protecting Your Adventure Lifestyle
========================================================================================
QUALITY • INTEGRITY • INNOVATION • SERVICE
Warrior Products, Inc.
16850 SW Upper Boones Ferry Rd
Ste. A
Durham, OR 97224
Phone (888) 220-6861
Fax (503) 692-0364
[email protected]
CJ & YJ FRONT BUMPER
WITHOUT HITCH
INSTALLATION INSTRUCTIONS
WAR 485, 485C, 530, 530C, 540, 540C
48510, 48510C, 53010, 53010C
Bumpers are designed to fit over factory front frame horns and use existing
factory mounting holes.
1. Remove old bumper from vehicle. Save all bolts, you will need them in step
three (3). If you have lights on your stock bumper and wish to put them on your
new bumper, mark bumper for drilling and mount before installing.
2. Be sure that area where bumper will be mounted is flat and free of any damage.
3. Install new bumper with factory hardware removed in step one. Tighten bolts
to factory specifications. Re-torque after your initial test drive.
4. Install license plate on right front using factory bolts.
If you need further assistance installing your product, please contact us by email at
[email protected] or call us at (888) 220-6861.
THANK YOU FOR PURCHASING WARRIOR PRODUCTS