Warrior 580 ROCK CRAWLER BUMPER WITH RECEIVER (1976 – 1986 Jeep CJ5, CJ7, CJ8) User Manual
Rock crawler bumper with receiver, Installation instructions
Protecting Your Adventure Lifestyle
========================================================================================
QUALITY • INTEGRITY • INNOVATION • SERVICE
Warrior Products, Inc.
16850 SW Upper Boones Ferry Rd
Ste. A
Durham, OR 97224
Phone (888) 220-6861
Fax (503) 692-0364
ROCK CRAWLER BUMPER
WITH RECEIVER
INSTALLATION INSTRUCTIONS
WAR 575- 576- 577- 580
1. Remove your existing bumper, or bumperettes, from your vehicle.
2. Install new bumper using the 7/16” lock nuts and washers provided. Washers
should be placed between the nut and the frame. On some models the inside bolt
holes are not drilled. You will need to align the bumper and drill holes 15/32” or
_”. The gas tank may or may not need to be lower to install the inside nuts on to
the bolts. It is difficult but can be done with out lowering the tank.
3. After initial test drive, check all bolts for tightness. You should check all bolts
for tightness each time before using the receiver hitch for towing.
Enjoy your new bumper!
If you need further assistance installing your product, please contact us by email at
or call us at (888) 220-6861.
THANK YOU FOR PURCHASING WARRIOR PRODUCTS