Warrior 3550 Rear Bumper (2007-2013 FJ Cruiser) User Manual

Page 3

Advertising
background image

Warrior Products, Inc.

16850 SW Upper Boones Ferry Rd

Ste. A

Durham, OR 97224

Phone (888) 220-6861

Fax (503) 692-0364

[email protected]

Protecting Your Adventure Lifestyle

========================================================================================

QUALITY

INTEGRITY

INNOVATION

SERVICE

6. After both frame boxes have been

located and bolted onto the rear cross-
member, take the rear bumper and slide
it most of the way onto the rear cross-
member. If you have the backup
sensors, take this moment to feed the
wiring through the bumper and plug them
back into the sensors. Once you are
certain there is no pinching or binding of
the sensor wiring, slide the bumper the
rest of the way lining up the holes in the
frame boxes with the slots in the bumper
brackets.

7. Using the _”x1-1/2” bolts, _” nuts, 7/16”

flatwashers and _” lockwashers, loosely
thread them through the bumper
bracketry and frame boxes. Next, slip
the two slotted frame spacers between
the FJ’s frame and the lower extended
sections of the bumper bracketry. Use
the (4) M12x40mm bolts, 7/16”
flatwashers and _” lockwashers and
thread them most of the way into the
frame. Stand back and visually align the
bumper from the back and from the side
of the FJ. There will be little if any side-
to-side adjustability. If you are satisfied
with the placement, begin tightening all
the mounting bolts starting with the lower extended section of the bumper bracketry. Torque the
frame bolts and frame box hardware to 80-100lbs.

8. Reinstall the plastic corner panels by snapping them back into the plastic corner retainers and

using the push-pin fasteners. The backup sensor brackets may also be bent up to improve the
appearance. Reinstall the towing harness bracket if equipped. Your installation of the Warrior FJ
Cruiser Rear Bumper is now complete.

If you need further assistance installing your product, please contact us by email at

[email protected] or call us at (888) 220-6861

THANK YOU FOR PURCHASING WARRIOR PRODUCTS

Advertising