Warrior 59005 AUXILIARY LIGHT BRACKETS (Universal) - Manual

Protecting Your Adventure Lifestyle
========================================================================================
QUALITY • INTEGRITY • INNOVATION • SERVICE
Warrior, Inc.
16850 SW Upper Boones Ferry Rd
Ste. A
Durham, OR 97224
Phone: (888) 220-6861
Fax: (503) 692-0364
[email protected]
www.warriorproducts.com
UNIVERSAL LIGHT BRACKETS
59001, 59003, 59004, 59005
Warrior Universal Light Brackets are designed to be installed onto any
appropriately sized round tubing. This may include cargo racks, brush guards,
or any other products using round tubing.
1. Be sure that any bare metal surfaces are repainted prior to installation, if
needed, to prevent rust.
2. Place the brackets onto the tubing and assemble by placing the bottom
portion of the “clam shell” on the backside of the tubing and inserting bolts
through the pre-drilled holes. Place the lock washer and nut on the ends of the
bolts, once inserted through the two halves of the bracket, and tighten loosely.
3. Position the brackets where desired on the tubing and tighten the bolts.