Warrior 800005 REAR TRAC ARM BRACKET (1987 – 1996 Jeep YJ Wrangler) - Manual

Protecting Your Adventure Lifestyle
========================================================================================
QUALITY • INTEGRITY • INNOVATION • SERVICE
Warrior, Inc.
16850 SW Upper Boones Ferry Rd
Ste. A
Durham, OR 97224
Phone: (888) 220-6861
Fax: (503) 692-0364
[email protected]
www.warriorproducts.com
800005
REAR TRAC ARM BRACKET –JEEP YJ
INSTALLATION INSTRUCTIONS
Please read instructions before beginning installation. Check the kit hardware against the parts list. Be sure
you have all needed parts and know where they go.
1. Referring to the illustration shown below, install the rear track arm bracket as shown using the hardware
provided.
2. Remove the rear track arm and save the hardware.
3. Slip the bracket over the original mounting bracket and attach with _” x 2 _” bolt provided.
4. Re-install the factory Track Rod Bracket with original hardware and torque the existing track bar bracket
bolt to 74 ft./lbs.
MAINTENANCE INFORMATION
It is the ultimate buyers responsibility to have all bolts/nuts checked for tightness after the first 100 miles. After that, check them
every 1000 miles. Wheel alignment steering system, suspension and drive line systems must be inspected by a qualified
professional mechanic at least every 3000 miles.
Warrior, Inc. Technical Assistance - 888-220-6861
PARTS LIST