Warrior 30640 LIFT KIT (1987 – 1996 Jeep YJ Wrangler) - Manual (Page 3)

Protecting Your Adventure Lifestyle
========================================================================================
QUALITY • INTEGRITY • INNOVATION • SERVICE
Warrior, Inc.
16850 SW Upper Boones Ferry Rd
Ste. A
Durham, OR 97224
Phone: (888) 220-6861
Fax: (503) 692-0364
[email protected]
www.warriorproducts.com
Then insert the line in the larger end and replace
the brake line clip to secure the line in place
Assemble as shown with brake line bracket mounted to the
frame in the stock brake line location. Pull the steel line out
from the frame and bolt it in the other hole on the bracket.
Stock track rod
New track
rod bracket
Figure 3
New bump stop
snubber.
Remove the brake clip at this location. This will allow
the steel line to be pulled out from the frame mount.
Install the bracket as shown with a bolt through the
small hole of the bracket and stock mounting point.
ALWAYS USE CAUTION NOT TO PINCH OR
BREAK THE STEEL LINE!
Rear passenger side spring