Warrior 800003 BUMP STOP BRACKET (1987 – 1996 Jeep YJ Wrangler) - Manual

Protecting Your Adventure Lifestyle
========================================================================================
QUALITY • INTEGRITY • INNOVATION • SERVICE
Warrior, Inc.
16850 SW Upper Boones Ferry Rd
Ste. A
Durham, OR 97224
Phone: (888) 220-6861
Fax: (503) 692-0364
[email protected]
www.warriorproducts.com
800003
BUMP STOP BRACKET – JEEP YJ
INSTALL INSTRUCTIONS
Please read instructions before beginning installation. Check the kit hardware against the parts list. Be sure
you have all needed parts and know where they go.
1. Loosen the U-bolts and slide the Bump Stop under the U-bolts, on top of the axle, and tighten.
2. Repeat on the other side.
MAINTENANCE INFORMATION
It is the ultimate buyers responsibility to have all bolts/nuts checked for tightness after the first 100 miles. After that, check them
every 1000 miles. Wheel alignment steering system, suspension and drive line systems must be inspected by a qualified
professional mechanic at least every 3000 miles.
Warrior, Inc. Technical Assistance - 888-220-6861
PARTS LIST
BUMP STOP
BRACKET
700023 (4)