Warrior 907 HALF DOORS (1976–1983 Jeep CJ5, 1976–1986 Jeep CJ7, 1981–1986 Jeep CJ8) User Manual
Half doors, Installation instructions, Read all instructions before proceeding
Protecting Your Adventure Lifestyle
========================================================================================
QUALITY • INTEGRITY • INNOVATION • SERVICE
Warrior Products, Inc.
16850 SW Upper Boones Ferry Rd
Ste. A
Durham, OR 97224
Phone (888) 220-6861
Fax (503) 692-0364
HALF DOORS
INSTALLATION INSTRUCTIONS
WAR 904 & 907
Read all instructions before proceeding
IMPORTANT: These doors fit all applications where hard door striker pins and rotary paddle latch are
used. If you do not have hard door striker pins for the paddle latch, the door striker pin must be custom
mounted. There is no direct how-to on making this modification. If you are not comfortable doing these
modifications on your own, we recommend that you seek assistance with
an experienced fabrication shop. It may be helpful to acquire the striker
mounts from a later model CJ7 or YJ
1.
Begin by installing the paddle handles included in the kit into the half
door.
2.
Install foam molding onto the inside of the door. This should be done
to the inside edge, as shown in the diagram to the right.
3.
Hang door onto your Jeep to check for proper fitment. You should be
able to adjust the striker for height to align it so that the door closes smoothly
4.
If the door does not close tight enough against the doorjamb once aligned, washers can be used behind the
doors striker plate to space the striker away from the door jamb, thus pulling the door closed further.
Washers are included to help with this. The diagram below illustrates where washers can be located. You
may also need longer mounting screws for the striker; you will need to get these at a local hardware store if
needed.
5. For YJ Wrangler models, part #1525 is
available to attach Bestop® or OEM soft
upper half windows to your Warrior doors.
Additionally, you may be able to get YJ soft
upper doors to work with a CJ7 as well. We
also carry a line of tube door limiting strap kits
that can be adapted to half doors with the use
of different attachment hardware. For more
information on soft upper half door brackets
and door limiting straps visit us online at
www.warriorproducts.com
6.
You have now completed your installation.
(Later Model Rotary Door Striker Mount Shown)
If you need further assistance installing your product, please contact us by email at
or call us at (888) 220-6861.
THANK YOU FOR PURCHASING WARRIOR PRODUCTS