Warrior 1140_RJR CG531B MAXI-BREEZER TOP (1997 – 2006 Jeep TJ Wrangler) - Manual

Protecting Your Adventure Lifestyle
========================================================================================
QUALITY • INTEGRITY • INNOVATION • SERVICE
Warrior Products, Inc.
16850 SW Upper Boones Ferry Rd
Ste. A
Durham, OR 97224
Phone (888) 220-6861
Fax (503) 692-0364
[email protected]
MAXI-BREEZER TOP
INSTALLATION INSTRUCTIONS
WAR 1140 / RJR CG531B
TJ ’97-’02
NOTE: Installation of this top requires a windshield retaining channel, if you do not have one it can be
purchased at your local offroad shop- Bestop part #51235-01
1. Install the windshield retaining channel if needed
2. Insert folded webbing strip into your windshield channel
3. Attach corner straps, cinch until you have proper tension
4. Attach center strap to footman loop on windshield frame
5. Wrap two shorter straps around Roll Bar & cinch
6. Wrap far rear corner straps around Roll Bar or upper seat belt bolt & cinch until proper tension is
attained
7. Make sure rear straps do not interfere with operation of seat belts
8. Adjust all straps until you have a tight fit
Your Maxi-Breezer Top is now fully installed.
Enjoy your new Maxi-Breezer Top!
If you need further assistance installing your product, please contact us by email at
[email protected] or call us at (888) 220-6861.
THANK YOU FOR PURCHASING WARRIOR PRODUCTS