Warrior 841 SHOVEL & AXE MOUNT (Universal) - Manual

Protecting Your Adventure Lifestyle
========================================================================================
QUALITY • INTEGRITY • INNOVATION • SERVICE
Warrior Products, Inc.
16850 SW Upper Boones Ferry Rd
Ste. A
Durham, OR 97224
Phone (888) 220-6861
Fax (503) 692-0364
[email protected]
SHOVEL & AXE MOUNT
INSTALLATION INSTRUCTIONS
WAR 841
NOTE: Please read all instructions before starting installation.
1. PARTS BREAK DOWN
2-SMALL BRACKETS
4-LARGE BRACKETS
4-7/16” NUTS AND WASHER
2-1/2” WING NUTS
2. TAKE THE LARGE BRACKET WITH BOLTS WELDED TO IT AND PLACE
THE BOLTS BETWEEN THE BASKET TOP AND BOTTOM TUBES.
3. THEN TAKE THE SMALL BRACKET WITH TWO HOLES AND SLIP
OVER THE BOLTS FROM THE INSIDE OF THE BASKET. PLACE THE 7/16” WASHERS
OVER BOLTS AND THEN THE LOCK NUTS AND TIGHTEN INTO PLACE AS DESIRED.
SPACE THE OTHER LARGE BRACKET WITH BOLTS APPROXIMATELY 18” APART
AND REPEAT STEP 1 AND 2.
4. NOW TAKE THE OTHER LARGE BRACKET WITH ONE HOLE AND SLIP
IT OVER THE BOLT AND START THE _” WING NUT. THEN
REPEAT ON OTHER MOUNT. SLIP THE SHOVEL AND AXE INTO TOP
AND BOTTOM CLAMPS AND TIGHTEN WING NUTS.
5. CHECK WING NUTS AFTER EVERY OUTING OFF ROAD.
If you need further assistance installing your product, please contact us by email at
[email protected] or call us at (888) 220-6861.
THANK YOU FOR PURCHASING WARRIOR PRODUCTS