Warrior 1031 RECEIVER HITCH (1976 – 1986 Jeep CJ5, CJ7) User Manual
Receiver hitch
Protecting Your Adventure Lifestyle
========================================================================================
QUALITY • INTEGRITY • INNOVATION • SERVICE
Warrior Products, Inc.
16850 SW Upper Boones Ferry Rd
Ste. A
Durham, OR 97224
Phone (888) 220-6861
Fax (503) 692-0364
RECEIVER HITCH
INSTALLATION INSTRUCTIONS
WAR 1030 & 1031
1. Remove factory bumperettes from both rear frame horns.
2. All eight (8) mounting holes will have to be enlarged to except _” bolts which
are supplied in the installation kit. If you are going to reinstall your bumper-
ettes, drill these to except the bolts.
3. The eight washers, with two (2) holes, must be installed with each pair of bolts.
One in front of the hitch, four places, and one behind the frame, four places.
4. The outside washer can go either on top of the bumperette or behind, but must
be on the outside of the hitch. The hitch must be secured next to the frame.
5. Tighten all mounting bolts to 75ft.lbs. with a torque wrench.
Do Not Exceed Vehicle Manufacturers Recommended Towing Capacity!
Load Capacity 2,500 – 5,500 lbs
If you need further assistance installing your product, please contact us by email at
or call us at (888) 220-6861.
THANK YOU FOR PURCHASING WARRIOR PRODUCTS