Warrior CATALOG 2013 JEEP PRODUCT - Manual (Page 3)

4 5
Rear corners provide structural support to the corner area and enhance the appearance of
the vehicle too. To allow easier installation, corners have precut holes for the gas tank and
tail light openings, unless otherwise specified. Sold in pairs.
Note: Rear Corners will not fit Wrangler Jeeps with the plastic option, Renegade/Sahara packages in 2006 and earlier
models.
reAr cornerS
reAr cornerS
w/ cUtoUtS For led lightS
Our new Rear Corners have openings to accommodate two flush-mounted LEDs: a 4” red
stop, turn and taillight, plus a 2” clear lens reverse light. All lights are American-made with
a lifetime warranty and are sold separately. The corners also have a cutout for the gas tank.
Our corners are long-lasting, durable and are available in three finishes. Sold in pairs.
Body ArMor
diamond plate – Constructed of #3003 aluminum treadbrite and highly polished to a
bright luster, these accessories have the look of chrome, yet perform better under adverse
conditions. (Chrome may flake and peel, and plastic may break.)
Black diamond plate – Available for all aluminum parts, the powder-coat finish is
electro-statically painted to provide scratch and corrosion resistance plus lasting
protection from the elements.
polished Aluminum – Constructed of #5052 aluminum and polished to a bright
luster, these accessories have similar performance characteristics to our diamond plate product,
but without the treadbrite texture.
Smooth Black Steel – Available for most parts made of aluminum, the added strength and
durability of steel is a good alternative. Products constructed of 12-gauge HRPO steel are black
powder-coated to prevent rust and corrosion.
Brushed Aluminum – Constructed of #5052 aluminum, these accessories have
similar performance characteristics to our diamond plate and polished product, but with
a brushed exterior finish. This finish is only available for a limited number of products.
hd Aluminum – Constructed of 3/16” thick unfinished aluminum, this new
aluminum design helps keep the overall weight of our armor at a minimum, while
the unfinished surface can be touched up after a day on the trail with a quick
buffing using a steel wool pad.
hammertone gray – MIG-welded, jig-built spring shackles and greaseable leaf spring
shackle kits come in a hammertone gray finish.
gold Zinc – MIG-welded, jig-built spring shackles and greaseable leaf spring shackle
kits come in a gold zinc finish.
Warrior Products offers the broadest selection of base materials and surface finishes in its line of Body Armor Exterior Protection accessories
available on the market today. In addition to our signature aluminum diamond plate material, we offer the following five finishes:
UniVerSAl - what does it mean?
FiniSheS
Model Year Description
Finish/Part Number
Diamond
Plate
Black
Diamond Plate
Polished
Aluminum
Smooth Black
Steel
Rear Corners
CJ2A & 3A
45 - 55 Corners w/o Holes 903 903PC 903PA S903
CJ2A & 3A 45 - 55 Corners w/ No Fender Cut Out 903WO 903WOPC 903WOPA S903WO
CJ5 & M38 53 - 83 Corners w/o Holes 902 902PC 902PA S902
CJ5 & M38 53 - 83 Full Wrap Around 902FW 902FWPC - S902FW
CJ7 76 - 86 Corners w/o Holes 904 904PC 904PA S904
CJ7 76 - 86 Corners w/ Holes 904A 904APC 904APA S904A
CJ8 81 - 86 Corners w/o Holes 910 910PC 910PA S910
YJ Wrangler 87 - 96 Corners w/o Holes 907 907PC 907PA S907
YJ Wrangler 87 - 96 Corners w/ Holes 907A 907APC 907APA S907A
TJ Wrangler & Rubicon 97 - 06 Corners w/o Holes 916 916PC 916PA S916
TJ Wrangler & Rubicon 97 - 06 Corners w/ Holes 916A 916APC 916APA S916A
TJ Wrangler & Rubicon 97 - 06 Corners for Bushwacker Flares w/Holes 916AX 916AXPC - S916AX
LJ Unlimited 04 - 06 Corners w/o Holes 918 918PC 918PA S918
LJ Unlimited 04 - 06 Corners w/ Holes 918A 918APC 918APA S918A
LJ Unlimited 04 - 06 Corners for Bushwacker Flares w/Holes 918AX 918AXPC - S918AX
JK Wrangler & Unlimited 07 - 12 Corners w/ Holes 920A 920APC 920APA S920A
JK Wrangler 2-D 07 - 12 Rear Corners w/out Cutouts (gas tank only) 924 924PC 924PA S924
JK Unlimited 4-D 07 - 12 Rear Corners w/out Cutouts (gas tank only) 926 926PC 926PA S926
Rear Corners w/ Cutouts for LED Lights
YJ Wrangler
87 - 96 Rear Corners w/ Cutouts for LED Lights 915A 915APC 915APA S915A
TJ Wrangler 97 - 06 Rear Corners w/ Cutouts for LED Lights 917A 917APC 917APA S917A
JK Wrangler - 2 Door 07 - 12 Rear Corners w/ Cutouts for LED Lights 924A 924APC 924APA S924A
JK Unlimited - 4 Door 07 - 12 Rear Corners w/ Cutouts for LED Lights 926A 926APC 926APA S926A
LJ Unlimited 04 - 06 Rear Corners w/ Cutouts for LED Lights 925A 925APC 925APA S925A
NOTE: All Polished Aluminum (PA Series part #s) are considered a special order. This means that they are not an inventoried part number and will be subject to an estimated 4 week
waiting period. Special orders cannot be cancelled or returned. Special order items will still carry the standard Warrior Products warranty.
Body Armor
Many Warrior Products brand items are marked with a fitment titled “Universal”. Universal fitment products are
designed with no fitment in mind, meaning that it doesn’t fit any specific vehicle. These parts are of a custom
nature, designed to be sold to the customer willing to “make it fit”.