Warrior 800010 REAR SWAY BAR LINK (1997 – 2006 Jeep TJ Wrangler) - Manual

Protecting Your Adventure Lifestyle
========================================================================================
QUALITY • INTEGRITY • INNOVATION • SERVICE
Warrior Products, Inc.
16850 SW Upper Boones Ferry Rd
Ste. A
Durham, OR 97224
Phone (888) 220-6861
Fax (503) 692-0364
[email protected]
800010
REAR SWAY BAR LINK –JEEP TJ
INSTALLATION INSTRUCTIONS
Please read instructions before beginning installation. Check the kit hardware against the parts list. Be sure
you have all needed parts and know where they go.
1. Assemble rear sway bar end link using the bushings provided. Refer to the illustration shown below.
2. When reinstalling the existing stabilizer bar you must ensure that the bar is centered, equally spaced, over
both sides of the differential housing.
3. Fasten using existing hardware.
4. Torque to 40 ft./lbs.
MAINTENANCE INFORMATION
It is the ultimate buyers responsibility to have all bolts/nuts checked for tightness after the first 100 miles. After that, check them
every 1000 miles. Wheel alignment steering system, suspension and drive line systems must be inspected by a qualified
professional mechanic at least every 3000 miles.
Warrior, Inc. Technical Assistance - 888-220-6861
PARTS LIST
(2) 700029