VEGA VEGACONNECT - Manual (Page 2)

VEGACONNECT 2
Technical Information
1 Product description
VEGACONNECT connection cable is used for conversion
of VEGA-specific VBUS/DISBUS-signals to standard
RS 232-signals.
Via a 9-pole SUB-D plug VEGACONNECT is connected to
the standard interface of an available PC/LAPTOP and via
a 2 mm-plug to the CONNECT-sockets of the VEGA-
instrument.
It is possible to connect the following instruments:
- ECHOFOX
® -sensors
VEGASON 83 … 87 FK/GK as well as 83 … 87 FV/GV
- ECHOFOX ® -sensors
VEGAPULS 64 DK/FK/UK as well as 64 DV/FV/UV
- Ex-Zone 10 (StEx)-version of these sensors
- Signal conditioning instrument VEGAMET serie 500
Further connection possibilities for VEGACONNECT are:
- The connection line between VBUS-sensor and signal
conditioning instrument
- the 0/4 … 20 mA-output of K (compact)-version of the
sensors.
VEGACONNECT is located in a stable plastic housing and
is supplied completely with connection lines and plug
connections.
The power supply is realized via the RS 232-interface of
PC / LAPTOP.
The operating software VEGA VISUAL OPERATING is
required to operate VEGACONNECT. It is installed on PC/
LAPTOP under WINDOWS and enables a comfortable,
menu guided parameter adjustment of ECHOFOX
® -
sensors and signal conditioning instruments of the new
generation.
2 Connection versions
2.1 Sensor in conjunction with VEGAMET
509 V, 512 V or VEGALOG 570 with VBUS-
card
3
2
4
1
COM
e.g. VEGAMET 512 V
Connection points Parameter adjustment
1 Sensor 1
Sensor 2
2 Sensor 1
Sensor 2
3 Sensor 1
4 Sensor 2
2.2 Sensor in conjunction with VEGAMET
515 V
Sensor 2
Sensor 1
CONNECT-sockets on
the sensor
CONNECT-sockets on
the sensor
connection line
CONNECT
CONNECT
COM-sockets in
the front plate
Connection points Parameter adjustment
1 VEGAMET
Sensor 1
Sensor 2
2 Sensor 1
Sensor 2
3 Sensor 1
4 Sensor 2
3
2
1
4
Sensor 1
Sensor 2
e.g. VEGAMET 515 V
CONNECT-sockets
on the sensor
CONNECT-sockets on
the sensor
connection line
CONNECT-
sockets in the
front plate
CONNECT
CONNECT