VDO Z1 - Manual (Page 34)

25
INSTRUCTION MANUAL
Display √ ODOTOTAL
Maximum value 199,999 km or mi
11.3.22. ¬ TIME BIKE 1 = total time bike 1
Shows the total time of all day trips ridden with bike 1 in hhh:mm
Display
√ TIME BIKE 1
Maximum value 999:59 hhh:mm
11.3.23. ¬ TIME BIKE 2 = total ride time bike 2
Shows the total time of all day trips ridden with Bike 2 in hhh:mm
Display
√ TIME BIKE 2
Maximum value 999:59 hhh:mm
11.3.24. ¬ TOTAL TIME = total ride time bike 1 and bike 2
Shows the total time of all day trips ridden with bike 1 and bike 2 in
hhh:mm
Display
√ TOTAL TIME
Maximum value: 1999:59 hhhh:mm
TIMING FUNCTIONS/WATT (button ≈ )
11.3.25. ¬ £ STOPWATCH = manual stopwatch
Prerequisite: Only after selecting stopwatch, chapter 13.1.
Display
≈ STOPWATCH
Start measuring ∫ Press
Stop measuring ∫ Press
Reset: ∫ Press button for 4 sec.
11.3.26. ¬ £ TIMER = timer 1 / timer 2 / timer 1+2
Prerequisite: Only after selecting timer, chapter.
13.1.
Display ≈
Start measuring ∫ Press
End of measurement Automatic after timer period
elapses (or number of sequen-
ces for timer 1+2), beeper
signal
Reset: ∫ Press button for 4 sec.
11.3.27. ¬ £ COUNTDOWN = countdown timer
Prerequisite: Only after selection of countdown timer, chapter 13.1.
Display
≈
Start measuring ∫ Press
End of measurement Automatic after elapse of count-
down, beeper signal
Reset: ∫ Press button for 4 sec.
11.3.28 ¬ POWER WATT = actual power in watt (optional)
Prerequisite: Only if personal data have been entered, chapter 6.
Displaying the information ≈ POWER
WATT
IMPORTANT: Only functions with installed cadence extension. If the
cadence option is installed the power display shows ZERO when the
pedals are not moving.
This resets all data of the functions marked by L .