VEGA D98 Pressure transmitter - Manual (Page 7)

Pressure transmitter D98 7
Mounting
3 Mounting
3.1 Mounting instructions
Cable entry
The pressure transmitter can be mounted in
any position.
Cable entries must point downward to avoid
moisture ingress. For this purpose, the hous-
ing can be rotated by 330 °. With vertically
mounted sensors, the connection cable to the
housing must point downward so that rain
and condensed water can drip off. This ap-
plies especially to outdoor mounting, or
mounting in humid rooms (e.g. caused by
cleaning processes) or on cooled or heated
vessels.
Moisture
3.2 Compensation of the atmos-
pheric pressure
The atmospheric pressure is compensated
via a breather facility integrated in the hous-
ing (air-permeable and moisture-resistant
PTFE insert).