Pioneer CMX-5000 - Manual (Page 17)

<DRB1254> 17
CUE
REV FWD
SEARCH
PLAY/PAUSE
EJECT
TRACK SEARCH
LOOP
OUT EXIT RELOOP TIME MODE TEMPO
MT
MASTER
TEMPO
0
± 6/ ± 10/ ± 16 AUTO CUE
IN/REALTIME CUE
6
0
4 ¢
1 ¡ TRACK
LOOP
TEMPO
BPM 1 7 6 5 4 3 2
13 12 11 10 9 17 18 19 20 16 15 14 8
REMAIN M S F
16
10
6
A.CUE
RELOOP
A•B AUDIO-OUT SELECT
POWER
MONITOR
MIN MAX
PHONES
A•B A•B/ AUTO MIX PLAYER SELECT
A B
EJECT
DISC
A PLAYER
'
0
AUTO MIX PLAY
BPM SYNC
SHORT TIME
A B
TRACK DISC PROGRAM
PLAY MODE SELECT
CLEAR
PLAYER SELECT
BPM/TRACK
PUSH ENTER
BPM/TRACK
SHORT TIME CHANGE MIX TIME INSTANT
CHANGE
MIX MODE SELECT
BPM
NEXT
MIN MAX
AUTO MIX PLAY
BPM SYNC
SHORT TIME
A B
TRACK DISC PROGRAM
PLAY MODE SELECT
CLEAR
PLAYER SELECT
BPM/TRACK
PUSH ENTER
BPM/TRACK
SHORT TIME CHANGE MIX TIME INSTANT
CHANGE
MIX MODE SELECT
BPM
NEXT
MIN MAX
OUT ADJUST
SHORT TIME
MIX MODE SELECT
MIX TIME INSTANT CHANGE
BPM SYNC
Remote control unit
Player
AUTO MIX PLAY
Disc insertion slot
BPM/TRACK dial
PLAY MODE SELECT
PLAYER SELECT
7 DISC mode
DISC mode is used to mix and replay the tracks on a disc in
sequence and to mix and replay another disc when playback
is complete.
7 TRACK mode
TRACK mode is used to mix playback from Player A and
Player B, playing one track from each disc at a time in
sequence.
1. Insert discs into Player A and Player B.
2. Press the PLAY MODE SELECT DISC or TRACK but-
ton.
3. Press the AUTO MIX PLAY button.
÷ To start playback from a specified track, use the PLAYER
SELECT button to select the desired disc, push the TRACK
SEARCH button on the player that is playing to select the
track number, then press the AUTO MIX button.
7 PROGRAM mode
PROGRAM mode is used to produce mixed playback
according to a pre-programmed sequence of tracks.
1. Insert discs into Player A and Player B.
2. Press the PLAY MODE SELECT PROGRAM button.
3. Press PLAYER SELECT button A or B to select the
player in which the disc for which the program is to
be entered has been inserted.
4. Turn the BPM/TRACK dial to select the track num-
ber.
÷ The BPM/TRACK display will appear as illustrated below.
7. Press the AUTO MIX PLAY button.
÷ New tracks may be entered into program memory during
playback.
÷ Pressing the CLEAR button causes tracks to be erased from
program memory in sequence from the last track entered.
÷ The number of tracks programmed into memory will be
displayed on the display panel as, e.g., ‘Step 01’.
÷ Up to a maximum of 50 program steps may be specified.
The program is completely cleared by the following
operations.
1 By canceling AUTO MIX PLAY
2 By changing play mode to disc mode or track mode
3 By ejecting the disc for which the program has been entered
7 BPM SYNC
When BPM SYNC is turned on (i.e., when the BPM SYNC
button is lit), the tempo will be automatically changed so that
the number of beats per minute matches between tracks
mixing into each other. This feature may be used to match
the tempos of tracks to be mixed during auto mix playback.
1. Insert discs into Player A and Player B.
2. Specify the desired mixing mode and then start
auto mix playback.
÷ The number of BPM of the first track to be played will be
displayed on the BPM/TRACK display.
7 Changing the BPM
1. Press the BPM/NEXT button to switch to BPM.
(The BPM indicator will light up.)
2. Turn the BPM/TRACK dial to specify the number of
BPM.
÷ The variable range of the number of BPM is restricted to a
range of ±16% of the original tempo of a given track.
Specifying a change of greater than ±16% will cause the
track to be played back at its original tempo.
÷ Note that there may be times when, depending on the
track in question, it is impossible for the BPM counter to
count the number of BPM.
7 SHORT TIME
When SHORT TIME CHANGE is turned on (i.e., when the
SHORT TIME button is lit), the playback time of the current
track is shortened and then mixing begins.
Applications
BPM/TRACK display
BPM/NEXT
NEXT indicator
BPM indicator
Audio output switch`
5. Press the BPM/TRACK dial to confirm your selec-
tion.
6. Repeat steps 3 through 5 to enter other tracks into
program memory.
AUTO MIXING
BPM/TRACK
Indicates that track
number 1 has been
selected Indicates that the
disc in Player A has
been selected