VEGA Housing type 506 - Manual (Page 7)

Housing type 506 7
Mounting
- Insert the red safety pin through the gaps
of the power supply board and the guide
rail. This fastens the power supply board.
- Remove the adapter plug from the housing
socket.
- Insert the upper part of the housing into the
socket again, tighten the two screws on the
housing front.
- Now you can connect the supply voltage
for the power supply unit (90 … 250 V AC)
on the terminal strips of the socket.
Connection plug
Power supply
board
Guide rail
Gap
Safety pin
Terminal strips
Socket
Adapter plug