ARIETE Bagless Vacuum Cleaner 2798 - Manual (Page 10)

EN
- 8 -
DESCRIPTION OF THE APPLIANCE (Fig. 1)
VACUUM CLEANER ASSEMBLY
Insert the hose into the suction opening, pressing it down until it slots into place. To remove the hose,
press the two release buttons together and pull it out (FIG. 2).
CAUTION: Before fitting or removing attachments, always be sure to unplug the appliance from the
mains power.
ATTACHMENTS
Telescopic tube (R)
Insert the extension tube onto the handgrip then fit the required attachment. Once the attachment has
been inserted, it is possible to extend the telescopic tube to the required length using the lever (FIG.
3). Release the lever to secure the tube at the required length.
Floor brush (M)
Suitable for cleaning any type of surface. Use the device on the top part to:
- retract the bristles when cleaning carpets or rugs;
- lower the bristles for smooth flooring, such as PVC, parquet or tiles.
Crevice nozzle with brush (I)
This suction device is ideal for cleaning between the folds on fabrics, joints, corners or niches that
are impossible to reach using the floor cleaning device. This attachment can also be fitted directly to
the handle (Q).
Small nozzle (L)
Useful for removing dust from books or other delicate items such as picture frames, etc.
It is also suitable for cleaning upholstered furniture, mattresses, soft furnishings, etc. and can also be
fitted directly to the hand grip (Q).
A Suction device coupling
B Dust
container
C Dust container handle
D Foot-operated cord rewinder button
E Top carry handle
F Dust container removal button
G Foot-operated on/off switch
H HEPA filter compartment
I Crevice nozzle with brush
L Small nozzle
M Floor brush
N Hard floors/carpet selector
O Release
buttons
P Suction control
Q Hand grip
R Telescopic tube
S Flexible hose