VEGA VEGAPULS 65 (≥ 2.0.0 - ≤ 3.8) 4 … 20 mA_HART two-wire - Manual (Page 6)

D uring the entire duration of use, the user is obliged to determine the
compliance of the required occupational safety measures with the
current valid rules and regulations and also take note of new
regulations.
2.5 Safety label on the instrument
T he safety approval markings and safety tips on the device must be
observed.
2.6 CE conformity
T his device fulfills the legal requirements of the applicable EC
guidelines. By attaching the CE mark, VEGA provides a confirmation
of successful testing. You can find the CE conformity declaration in the
download area of www.vega.com.
2.7 Fulfillment of NAMUR recommendations
W ith respect to compatibility, the NAMUR recommendation NE 53 is
fulfilled. This applies also to the corresponding indicating and
adjustment components. VEGA instruments are generally upward and
downward compatible.
l S ensor software for DTM VEGAPULS 65 HART, PA or FF
l DTM VEGAPULS 65 for adjustment software PACTware
l I ndicating and adjustment module for sensor software
T he parameter adjustment of the basic sensor functions is independ-
ent of the software version. The range of available functions depends
on the respective software version of the individual components.
T he software version of VEGAPULS 65 can be determined as follows:
l
via PACTware
l
on the type label of the electronics
l
via the indicating and adjustment module
Y ou can view all software histories on our website www.vega.com.
M ake use of this advantage and get registered for update information
via e-mail.
2.8 FCC and IC conformity (only for USA/Canada)
VEGAPULS 65 is FCC and IC approved:
l FCC ID: O6QPULS6566
l IC: 3892A-PS6566
M odifications not expressly approved by VEGA will lead to expiry of
the operating licence according to FCC.
VEGAPULS 65 is in conformity with part 15 of the FCC regulations.
T ake note of the respective operating regulations:
6 VEGAPULS 65 • 4 … 20 mA/HART two-wire
2 F or your safety
28437
-EN
-090305