VEGA VEGAPULS 62 (≥ 2.0.0 - ≤ 3.8) 4 … 20 mA_HART two-wire - Manual (Page 8)

3 Product description
3.1 Configuration
T
he VEGAPULS 62 radar sensor is available in two electronics
versions:
l S tandard electronics type PS60KH
l E lectronics with increased sensitivity type PS60KD
T he respective version can be determined by means of the type label
on the electronics.
T he electronics version influences the CE conformity, the functional
safety (SIL), the factory setting for product selection and vessel form,
the accuracy, the voltage supply as well as the approvals of
VEGAPULS
62. T he differences are specified in this operating
instructions manual in the respective paragraphs.
T he scope of delivery encompasses:
l VEGAPULS 62 radar sensor
l D ocumentation
-
this operating instructions manual
-
S afety Manual 31338 "VEGAPULS series 60 - 4 … 20 mA/
HART" (
optionally)
-
O perating instructions manual 27835 "Indicating and adjust-
ment module PLICSCOM" (optional)
-
S upplementary instructions manual 31708 "Heating for in-
dicating and adjustment module" (optional)
-
S upplementary instructions manual "Plug connector for con-
tinuously measuring sensors" (optional)
-
E x-specific "Safety instructions" (with Ex-versions)
-
if necessary, further certificates
VEGAPULS 62 consists of the following components:
l H orn or parabolic antenna
l
process fitting (depending on the version flange or thread)
l
optionally available with purging air connection, reflux valve
l H ousing with electronics, optionally available with plug connector,
optionally available with connection cable
l H
ousing cover, optionally available with indicating and adjustment
module PLICSCOM
T he components are available in different versions.
Versions
Scope of delivery
Components
8 VEGAPULS 62 • 4 … 20 mA/HART two-wire
3 P roduct description
28435
-EN
-090305