VEGA Plug connector 7-8" Foundation Fieldbus for continuously measuring sensors - Manual (Page 4)

2 Connecting to power supply
2.1 Plug assignments
Each respective wiring plan shows the assignment of the
individual pins of the plug connector depending on the signal
output. The chart shows the assignment of the individual
contact pins to the terminals of the sensor electronics.
3 1
2 4
Fig. 1: View to the pins of the plug insert with Foundation Fieldbus
1 - (Pin 1)
2 + (Pin 2)
3 free (Pin 3)
4 Screen (Pin 4)
Contact pin Colour connection
cable
Terminal, electro-
nics
1 Blue 2
2 Brown 1
3 free free
4 Green/yellow
4 Plug connector 7/8" Foundation Fieldbus - for continuously measuring sensors
Connecting to power supply
30373
-EN
-050802