3 function chart – VEGA VEGACAP 63 - transistor (NPN_PNP) User Manual
Page 23
23
6 Setup
VEGACAP 63 • - transistor (NPN/PNP)
30010-EN-130916
5. Turn the potentiometer (1) very slowly clockwise until the control
lamp (6) lights red. If the control lamp does not light red, set the
meas. range selection switch (2) to the next higher stage and
repeat the setting with the potentiometer (1) until the control lamp
lights red.
The measuring system is now ready for operation.
6.3 Function chart
The following chart provides an overview of the switching conditions
depending on the set mode and the level.
Level
Switching status Control lamp
Mode max.
Overflow protec-
tion
closed
Green
Mode max.
Overflow protec-
tion
open
Red
Mode min.
Dry run protection
closed
Green
Mode min.
Dry run protection
open
Red
Failure of the sup-
ply voltage
(min./max. mode)
any
open
Fault
any
open
flashes red