6 set up, 1 indicating and adjustment elements – VEGA VEGALOG 571 AA User Manual
Page 13
6 Set up
6.1 Indicating and adjustment elements
1
2
on
VEGALOG
VEGALOG
571
!
Fig. 4: Indicating and adjustment elements
1
LED for fault signal
2
LED for operating voltage
l
LED fault signal [1]
-
flashes in case of communication problems on the
LOGBUS
-
lights during initialisation and during the self-test
-
lights permanently during a hardware error
l
LED operating voltage [2]
-
lights when voltage supply is on
The module cards of the VEGALOG system have no own
adjustment elements. All adjustment measures are carried out
with the PC through the adjustment software PACTware™.
Setup information is available in the operating instructions
manual "VEGALOG 571 CPU" as well as in the online help of
PACTware™.
Description of the status
LEDs
VEGALOG 571 AA - Output card analogue
13
Set up
31949
-EN
-060606