Hyundai H-CMD7083 - Manual (Page 15)

15
Radio operations
Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not available in
you area, the following service is not available, either.
Band select
Press BAND/NP/SUB button on the front panel or BND/SYS button on RC repeatedly to select your desired radio band
during RADIO mode: FM1, FM2, FM3, AM1, AM2.
Auto/Manual tuning
Manual tuning: Press briefly the SEEK-/+ buttons on the RC or press briefly PREV/NEXT buttons on the panel to
select a station downward or upward step by step.
Automatic tuning: Press and hold for 2 seconds the SEEK-/+ buttons on the RC press and hold for 2 seconds
PREV/NEXT buttons on the panel, the automatic search will start. It will play when finds the station.
Programming tuner stations
You can store up to a total of 30 radio stations in the memory (18 FM, 12 AM), manually or automatically.
To store a station:
Select a band (if needed)
Select a station by SEEK-/+ on the RC or PREV/NEXT buttons on the panel.
Hold a Preset button (1-6), which you want store the station for at least 2 seconds.
To recall a station:
Select a band (if needed)
Press a Preset button (1-6) briefly to recall the stored station
APS (Auto memory store/Preset scan) function
Preset scan: press APS button on the panel or AMS button on the RC to scan all preset stations in the memory of the
current band and stay on each memory stations for about 5 seconds. To stop preset scan, press this button again. To listen to
saved station press 1-6 buttons.