3 mounting, 1 mounting preparations, 2 mounting steps – VEGA VEGAPULS 68 Antenna impedance cone User Manual
Page 5: 3mounting
Advertising
3
Mounting
3
.
1
Mounting preparations
The following tools are required for mounting:
l
Hexagon spanner size 3
l
Emery paper as gripping means
l
Mounting help from the scope of delivery
3
.
2
Mounting steps
Proceed as follows:
1
Loosen the hexagon screws (3) on the antenna socket
2
Remove the antenna (4)
3
Pull out the existing impedace cone carefully
4
Place the mounting help on the released opening
3
4
1
2
Fig. 1: Dismounting of the horn antenna
1
Marking
2
Chamfer (only with rinsing air connection)
3
Hexagon screws on the antenna socket (4 pcs.)
4
Antenna
The bevel on the outside of the mounting aid must point away from the
process fitting.
5
Insert the new impedance cone with seal carefully
Mounting
Antenna impedance cone • for VEGAPULS 62 and 68
5
3 Mounting
31381
-
EN
-100413
Advertising